Crimson Publishers Publish With Us Reprints e-Books Video articles

Abstract

Aspects in Mining & Mineral Science

Numerical Simulation on Hydraulic Circulation Chamber in a Deep Clarification Device for Beneficiation Circulating Water

  • Open or CloseKai Tian1,2,3, Jiahong Li1,2, Wentao Hu1,2,3*, Siyi Liang3 and Huajun Wang1,3

    1Key Laboratory of High-Efficient Mining and Safety of Metal Mines Ministry of Education (USTB), University of Science and Technology Beijing, China

    2State Key Laboratory of Mineral Processing of China, China

    3National Technical Center of Circular Economy, MCC Capital Engineering & Research Incorporation Limited, China

    *Corresponding author: Wentao Hu, Key Laboratory of High-Efficient Mining and Safety of Metal Mines Ministry of Education (USTB), University of Science and Technology Beijing, Beijing, 100083, China

Submission: November 01, 2021; Published: November 10, 2021

DOI: 10.31031/AMMS.2021.07.000672

ISSN : 2578-0255
Volume7 Issue5

Abstract

The beneficiation plants generally process the production wastewater of the whole plant through natural concentration and clarification, and then feedback to each working procedure through the circulation pump house. This part of water referred is called circulating water in beneficiation plants. However, the circulating water in some beneficiation plants contains an excess suspended solids, which fail to meet the process demand of mineral separation [1-4]. Thus, it is necessary to conduct further treatment on the circulating water to increase water quality. The suspended solid in the circulating water is fine-grained, and difficult to precipitate due to separate particles is found uneasy to collide and forming flocs. The current investigation proposed a new type of deep clarification device to remove suspension solids, which was mainly composed of a hydraulic circulation chamber and a sludging and settling chamber. The schematic diagram of the device is shown in Figure 1. The hydraulic circulation chamber is mainly based on the principle of finite space jet flow [5]. As shown in Figure 1, the hydraulic chamber is mainly implemented on the basis of the principle of limited space jet sludge circumfluence to achieve improved suspended particles collide.

Get access to the full text of this article