Abstract

Research & Development in Material Science

Effects of Process Parameters on MRR, EWR and Ra in Nanoparticles Mixed EDM

  • Open or Close Boopathi1*, R Thanigaivelan1 and M Prabu2

    1Department of Mechanical Engineering, Mahendra Engineering College, India

    2Department of Mechanical Engineering, KSR College of Engineering, India

    *Corresponding author: R Boopathi, Department of Mechanical Engineering, Mahendra Engineering College, Mallasamudram, India, Tel: 98658 11533; Email: boopathiaagash@gmail.com

Submission: February 23, 2018; Published: March 09, 2018

DOI: 10.31031/RDMS.2018.04.000586

ISSN: 2576-8840
Volume4 Issue2

Abstract

Electrical discharge machining characteristics of inconel 718 alloy using titanium carbide (TiC) nanoparticles mixed dielectric fluid was studied. Experiments have been performed according to face centered central composite design. The effect of input parameters such as current, pulse on-time and pulse off-time on the output responses like material removal rate (MRR), tool wear rate (TWR) and surface roughness (Ra) are evaluated. Dielectric fluid used in this experiment was kerosene mixed with TiC nanoparticles. The result shows that MRR and Ra gets improved, TWR get reduced.

Keywords: TiC; EDM; MRR; TWR; Ra

Get access to the full text of this article